Front Seat Replacement - Bucket. Chevrolet Tahoe

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2008 🢒 Tahoe - 2WD 🢒 Seats 🢒 Seat Hardware, Trim, and Upholstery 🢒 Front Seat Replacement - Bucket

Front Seat Replacement - Bucket without HP2

Callout

Component Name

Remove the front seat adjuster covers. Refer to Front Seat Adjuster Track Finish Cover Replacement .
Disconnect the seat belt from the seat. Refer to Seat Belt Retractor Pretensioner Replacement - Front .

Front Seat Assembly Nut (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tip
Adjust the seat rearward to access to the nuts.

Tighten
45 N·m (33 lb ft)

Front Seat Assembly Bolt (Qty: 2)

Tip
Adjust the seat forward to access the bolts.

Tighten
45 N·m (33 lb ft)

Front Seat Assembly

Tip

•	Disconnect the electrical connector.

•	If removing and installing seat the center seat or floor console do not need to be removed.

Callout	Component Name
Preliminary Procedure Remove the front seat adjuster covers. Disconnect the seat belt anchor from the seat. Refer to Seat Belt Retractor Pretensioner Replacement - Front.
1	Front Seat Assembly Bolt (Qty: 2) Notice: Refer to Fastener Notice in the Preface section. Tighten 45 N·m (33 lb ft)
2	Front Seat Assembly Nut (Qty: 2) Tighten 45 N·m (33 lb ft)
3	Front Seat Assembly Procedure Disconnect the electrical connector.