Removal Procedure
- Separate the front of
the console (1) from the headliner.
 
- Push the assembly rearward and pull down in order to access the
retaining tabs.
 
- Remove the HVAC control assembly (2) by releasing the tabs
at the rear of the control and push out from the rear.
 
- Disconnect the electrical connector (3).
 
Installation Procedure
- Connect the electrical
connector (3).
 
- Install the HVAC control assembly (2) to the console (1).
 
- Install the console (1) to the headliner.
 
- Calibrate the HVAC module actuators. Refer to 
Actuator Recalibration 
in HVAC Systems - Automatic.