Rear Seat Armrest Replacement 60/40 - 50/50 Split

1. Fold the right side of the rear seat forward to gain access to the armrest trim cover and bolts.



2. Remove the armrest trim cover (7).
3. Remove the armrest bolts (6).
4. Remove the armrest by sliding off the pivot and out.

1. Install the rear seat armrest to the pivot point on the rear seat.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the armrest bolts (6).

Tighten
Tighten the bolts to 9 N·m (80 lb ft).

3. Install the armrest trim cover (7) and screws (8).
4. Fold the right rear seat back into the upright position.