Tools Required

1. Remove the differential from the rear axle housing. Refer to Differential Replacement .
2. Remove the differential side bearings by doing the following:

2.1.	Install the J 22912-B onto the differential case.

2.2.	Install the J 8107-4 or the J 8107-3 onto the differential case bearing.

2.3.	Remove the differential side bearings using the J 22912-B and a hydraulic press.

1. Install the differential side bearings by doing the following (8.6 inch, 9.5 inch axle):

1.1.	In order to protect the differential case, install theJ 8107-4 or the J 8107-3 in the case on the side opposite the bearing installation.

1.2.	Install the J 21784  (2), or the J 29710  (2) onto the differential case bearing as shown.

1.3.	Drive the bearing onto the case using the J 21784  (2), or the J 29710  (2) and the J 8092  (1).

2. Install the differential. Refer to Differential Replacement .