Removal Procedure
Important: Complete removal of the headliner is not required.
- Lower the headliner. Refer to 
Headlining Trim Panel Replacement
 in Interior Trim.
 
- Disconnect the cables from the antenna.
 
- Loosen the retaining nut until the antenna assembly can be pulled from the top of the roof.
 
Installation Procedure
- Place the antenna assembly on the roof opening.
 
Notice: Refer to Fastener Notice in the Preface section.
- Tighten the retaining nut.
 
Tighten
Tighten the nut to 6 N·m (53 lb in).
- Connect the antenna cables.
 
- Install the headliner. Refer to 
Headlining Trim Panel Replacement
 in Interior Trim.