Preliminary Procedure

1. Remove the right rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side .
2. Disconnect the blower motor electrical connector.

1

Screw, Blower Motor (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
1.5 N·m (13 lb in)

2

Motor Assembly, Blower

Preliminary Procedure

1. Remove the right rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side.
2. Disconnect the blower motor electrical connector.

1

Locking Tab (Qty: 2)

Procedure

1. Remove one attaching screw securing blower motor if applicable
2. Carefully pull back locking tabs on blower motor assembly.

2

Auxiliary Blower Motor Assembly

Procedure

Rotate blower motor counterclockwise to remove.