Ignition System Checks
|
| • | Check for the proper ignition coil output voltage with a J 26792
spark tester, or equivalent. |
| • | Check the spark plugs for any of the following conditions: |
| - | Wet (fuel fouled) spark plugs |
| - | A terminal screw that is bent or loose (rotate and pull) |
| - | A ceramic insulator that has cracks, carbon tracking, or deposits
(red or black dust) |
| - | A tip insulator that has cracks, carbon tracking, deposits (oil,
carbon, glazing, fuel additive), or is loose (rattles) |
| - | A center electrode that is loose (wiggles side to side) |
| - | An incorrect spark plug gap that is too large or too small |
| - | Platinum pads that are missing |
| • | Check for poor electrical connections at the ignition coils. |
| • | Check for a correct ignition timing. |
|