Tools Required
Caution: Gasoline or gasoline vapors are highly flammable. A fire could occur
if an ignition source is present. Never drain or store gasoline or diesel
fuel in an open container, due to the possibility of fire or explosion. Have
a dry chemical (Class B) fire extinguisher nearby.
Caution: Always wear safety goggles when working with fuel in order to protect
the eyes from fuel splash.
Caution: Fuel Vapors can collect while servicing fuel system parts in enclosed
areas such as a trunk. To reduce the risk of fire and increased exposure to
vapors:
| • | Use forced air ventilation such as a fan set outside
of the trunk. |
| • | Plug or cap any fuel system openings in order to reduce fuel vapor
formation. |
| • | Clean up any spilled fuel immediately. |
| • | Avoid sparks and any source of ignition. |
| • | Use signs to alert others in the work area that fuel system work
is in process. |
Notice: Do not force a hose or the siphon of a hand operated pump into the fuel
tank. Forcing the hose or siphon into the fuel tank can damage the check
valve located in the fuel filler pipe.
- Remove the fuel filler cap.
- Insert the J 42960-2
fuel filler pipe flapper door holder into the fuel filler pipe.
- Insert the J 42960-1
flexible siphon hose, attached to a hand operated pump device, into
the fuel filler pipe (1).
- Gently feed the J 42960-1
siphon hose down
into the fuel filler pipe (1), and past the fuel inlet check valve (2).
The check valve is located in the neck of the fuel tank and can
be reached with approximately 58 cm (23 in) of hose.
- Continue to feed the siphon hose down the fuel filler pipe to
the bottom of the fuel tank (3). Reaching the bottom of the fuel tank
will require approximately 104 cm (41 in.) of hose.
- Drain any fuel in the fuel tank with the hand operated pump device.
- Remove the siphon hose from the fuel filler pipe.
