Notice: When adding fluid or making a complete fluid change, always use the
proper power steering fluid. Failure to use the proper fluid will cause hose
and seal damage and fluid leaks.
- Clean the  area surrounding the reservoir cap (1).
 
- Remove the reservoir cap.
 
- Inspect the fluid level in the reservoir (6) at regular
 intervals. Refer to 
Fluid and Lubricant Recommendations 
 in Maintenance and Lubrication.
 
- If the fluid is below the MIN mark (3), add DEXRON®-III
 Automatic Transmission Fluid, GM P/N 12346143 (Canadian P/N 10952622),
or equivalent,  to the MAX mark (2).
 
- Install the reservoir cap.
 
- When checking the fluid level after servicing the steering system,
 bleed the air from the system. Refer to 
Power Steering System Bleeding 
.