Removal Procedure
- Remove the following components
from the instrument panel:
 
| 1.2.  | The IP steering column opening trim plate (1) | 
 
- Release the upper and
lower retaining tabs behind the instrument panel which secure the rear window
 wiper/washer switch (2).
 
- Slide the rear window wiper/washer switch (2) from the
instrument panel in order to disconnect the electrical connector.
 
- Disconnect the rear window wiper/washer switch electrical connector.
 
- Remove the rear window wiper/washer switch (2) from the
vehicle.
 
Installation Procedure
- Connect the rear window
wiper/washer switch electrical connector.
 
- Install the rear window wiper/washer switch (2) to instrument
panel. Ensure that the retaining tabs are fully engaged.
 
- Install the IP steering
column opening trim plate (1) to the instrument panel.  Secure the
 trim plate with the 3 screws (2).