Removal Procedure
- Remove the 2 screws and 2 plastic retaining clips from the console.
 
- While removing the console, disconnect the electrical power/normal (P/N)
switch connector.
 
- Remove the power/normal (P/N) switch (2) from the console (1).
 
Installation Procedure
- Install the power/normal (P/N) switch (2) into the console
(1) .
 
- While installing the console connect the power/normal (P/N) switch electrical
connector.
 
- Install the console. 
 
- Install the 4 console screws and the 2 console plastic 
retaining clips.