Ignition System Checks 
 | 
|     •  | Check for the proper ignition coil output voltage with a J 26792 
 spark tester, or equivalent. |  
  
|     •  | Check the spark plugs for any of the following conditions: |  
  
|        -  | Wet (fuel fouled) spark plugs |  
  
|        -  | A terminal screw that is bent or loose (rotate and pull) |  
  
|        -  | A ceramic insulator that has cracks, carbon tracking, or deposits
(red or black dust) |  
  
|        -  | A tip insulator that has cracks, carbon tracking, deposits (oil,
carbon, glazing, fuel additive), or is loose (rattles) |  
  
|        -  | A center electrode that is loose (wiggles side to side) |  
  
|        -  | An incorrect spark plug gap that is too large or too small |  
  
|        -  | Platinum pads that are missing |  
  
|     •  | Check for poor electrical connections at the ignition coils. |  
  
|     •  | Check for a correct ignition timing. |  
  
 |