Radiator Inlet Hose Replacement 1.6L Engine

Caution: To avoid being burned, do not remove the radiator cap or surge tank cap while the engine is hot. The cooling system will release scalding fluid and steam under pressure if radiator cap or surge tank cap is removed while the engine and radiator are still hot.

1. Drain the engine coolant (1). Refer to Cooling System Draining and Filling .



2. Loosen and reposition the hose clamp on the radiator inlet hose (2) at the radiator.
3. Loosen and reposition the hose clamp on the radiator inlet hose at the thermostat housing (1).

Remove the radiator hose (2).

1. Position a new hose clamp on each end of the new radiator inlet hose (2) before installation.
2. Install the new radiator hose to the thermostat housing (1) and to the radiator.
3. Secure with two hose clamps.
4. Fill the radiator with an approved coolant. Refer to Cooling System Draining and Filling .

Radiator Inlet Hose Replacement 2.0L Engine

Caution: To avoid being burned, do not remove the radiator cap or surge tank cap while the engine is hot. The cooling system will release scalding fluid and steam under pressure if radiator cap or surge tank cap is removed while the engine and radiator are still hot.

1. Drain the engine coolant. Refer to Cooling System Draining and Filling .



2. Loosen and reposition the hose clamp on the radiator inlet hose (2) at the radiator.
3. Loosen and reposition the hose clamp on the radiator inlet hose at the coolant pipe.

Remove the radiator hose (2).

1. Position a new hose clamp on each end of the new radiator inlet hose (2) before installation.
2. Install the new radiator hose to the coolant pipe and to the radiator.
3. Secure with two hose clamps.
4. Fill the radiator with an approved coolant. Refer to Cooling System Draining and Filling .