For 1990-2009 cars only
| • | Place the watertest stands. |
| • | Watertest stand specifications: |
| - | The type of nozzle is a full cone spray with 60 degrees included angle. Use a full jet spray nozzle No. ½ GG-25 or equivalent. |
| - | The nozzle height is approximately 1 ,600 mm (63 in) from the floor. |
| - | The volume of flow is 14 liters (3.7 gallons) per minute. |
| - | The windshield and front body pillar are approximately 30 degrees down, 45 degrees toward rear and aimed at the corner of the windshield. |
| - | The doors are approximately 30 degrees down, 45 degrees towards rear and aimed at the center of rear door or the rear quarter panel. |
| - | The back door window is approximately 30 degrees down, 30 degrees toward front. |
| • | Move both test stands toward the body until you obtain the water spray overlap, if you cannot obtain the water pressure 155 kPa (22 psi), due to a local situation. |
