For 1990-2009 cars only
Caution: Refer to Brake Fluid Caution in the Preface section.
Notice: Refer to Filling the Master Cylinder Notice in the Preface section.
Important: Flush the hydraulic brake system under the following conditions:
• The DOT rating of the brake fluid is incorrect. • The brake fluid contains water or mineral oil. • The rubber brake components are swollen, indicating contamination of
the brake fluid.
- Replace all damaged rubber brake components.
- Use 0.94 liter (1 quart) of Delco Supreme 11® Brake Fluid, GM P/N 12377967 (Canadian P/N 992667), or equivalent DOT 3 brake fluid, in order to flush the hydraulic brake system.
- Use the Manual Bleeding Procedure in order to flush the hydraulic brake system. Refer to Hydraulic Brake System Bleeding .
