Important: Before cutting out a stationary window, apply a double layer of masking tape
around the perimeter of the painted surfaces and the interior trim.
- Remove the spare tire stowage cover.
- Remove the spare tire and wheel assembly from the spare tire carrier.
- Gently disengage the plastic retainers that retain the rear door hinge
cover (1).
- Remove the rear door hinge cover (1) from the vehicle.
- Remove the rear window wiper arm, if equipped.
- Disconnect the rear window defogger electrical connectors.
Caution: When working with any type of glass or sheet metal with exposed or rough
edges, wear approved safety glasses and gloves in order to reduce
the chance of personal injury.
- Remove the rear window reveal molding, if equipped.
If the rear window reveal molding will not release, use a utility knife in
order to cut around the window in order to remove the rear window reveal molding.
Important: Keep the cutting edge of the tool against the window.
- This will allow the urethane adhesive to be separated from the window.
| • | Leave a base of urethane on the pinchweld flange. |
| • | The only suitable lubrication is clear water. |
| • | Use the J 24402-A
, J 39032
or equivalent in order to remove
the quarter window. |
- With the aid of an assistant, use the suction cups in order to lift
the rear window from the opening.
