- Remove the gearshift control lever from the gearshift lever case.
Refer to 
Gearshift Control Lever Replacement 
.
 
- Remove 4 bolts from the fan shroud at the radiator.
 
- Raise and support the vehicle. Refer to 
Lifting and Jacking the Vehicle 
 in General Information.
 
- Place a drain pan or suitable container underneath the transmission.
 
- Remove the transmission
oil level/filler plug (2) from the transmission.
 
- Remove the transmission drain plug (3) from the transmission and
drain the  transmission oil.
 
- Place index marks on the propeller shaft pinion flange yoke and
the differential pinion flange to ensure correct installation.
 
- Remove the following items from the vehicle:
 
| •  | The rear propeller shaft | 
 
- Remove the VSS bolt  (1)
and disconnect the VSS.
 
- Remove the following items from the driven speedometer gear case.
 
- Temporarily install the speedometer driven gear case retaining
bolt.
 
- Remove the Three-Way Catalytic Converter (TWC) and the muffler/tail
pipe assembly from the vehicle. Refer to
Front Pipe Replacement 
 in Engine Exhaust.
 
- Remove the drain pan from underneath the transmission.
 
- Support the transmission with a suitable hydraulic jack.
 
- Remove 2 bolts
(2) from the rear transmission mount.
 
- Remove 4 bolts and the rear transmission crossmember from
the vehicle.
 
- Remove 1 clamp and the breather hose from the gearshift
lever case.
 
- Remove 10 bolts and the gearshift lever case from the extension
case.