GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2002 🢒 TrailBlazer - 2WD 🢒 Steering 🢒 Steering Wheel and Column 🢒 Steering Shaft Replacement

Removal Procedure

    Object Number: 667564 Size: SH

    Caution: This vehicle is equipped with a Supplemental Inflatable Restraint (SIR) System. Failure to follow the correct procedure could cause the following conditions:

       • Air bag deployment
       • Personal injury
       • Unnecessary SIR system repairs
    In order to avoid the above conditions, observe the following guidelines:
       • Refer to SIR Component Views in order to determine if you are performing service on or near the SIR components or the SIR wiring.
       • If you are performing service on or near the SIR components or the SIR wiring, disable the SIR system. Refer to Disabling the SIR System.

  1. Disable the inflatable restraint steering wheel module. Refer to Disabling the SIR System in SIR.
  2. Remove the steering column tilt head. Refer to Steering Column Tilt Head Replacement .
  3. Remove the steering shaft (1) from the steering column tilt head assembly.
  4. Check the steering column for accident damage. Refer to Steering Column Accident Damage Inspection .

Installation Procedure

    Object Number: 667564 Size: SH
  1. Install the steering shaft (1) into the steering column tilt head assembly.
  2. Install the steering column tilt head. Refer to Steering Column Tilt Head Replacement .
  3. Enable the inflatable restraint steering wheel module. Refer to Enabling the SIR System in SIR.