Adjustment Procedure
- Inspect the liftgate window for proper fit
to the liftgate window weatherstrip.
 
| •  | Open and close the liftgate window. | 
 
| •  | If the liftgate window is hard to close, additional striker shims will
 need to be added. | 
 
| •  | If the liftgate window does not seal tightly against the weatherstrip,
 striker shims will need to be removed. | 
 
- Open the liftgate window.
 
- Loosen the nuts retaining the liftgate striker to the liftgate window.
 
Notice: Refer to Fastener Notice in the Preface section.
- Remove or add shims as determined above.
 
Tighten
Tighten the liftgate window striker nuts to 6 N·m
(53 lb in).
- Inspect the liftgate window for proper fit, readjust if necessary.
 
- Close the liftgate window.