Removal Procedure
- Lift up on the front edge
 of the door lock and side window switch (1) in order to release the
front retaining clip.
 
- Lift up on the rear edge of the switch panel in order to release
 the 2 rear retaining clips.
 
- Remove the electrical
 connector (2) from the memory seat switch.
 
- Remove the memory seat switch from the lock and door lock and
 side window switch (1).
 
Installation Procedure
- Position the memory seat
 switch to the lock and door lock and side window switch (1).
 
- Connect the electrical connector (2) to the memory seat
 switch.
 
- Install the door lock
 and side window switch (1). Verify that the front retaining
clips and the rear retaining clips are fully seated.