Removal Procedure
- Open the left instrument panel (IP) access cover.
 
- Reach into the access hole and release
the 4 retaining tabs located on the headlamp switch behind the IP.
 
- Remove the headlamp switch
from the IP, through the IP access hole.
 
- Disconnect the electrical connectors from the headlamp switch.
 
- Remove the headlamp from the IP.
 
Installation Procedure
- Position the headlamp switch near the
access hole. 
 
- Connect the electrical connectors to the headlamp switch.
 
- Install the headlamp switch to the IP.
Ensure that the retaining tabs are fully seated.
 
- Install the left IP access cover.