GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2007 🢒 TrailBlazer - 2WD 🢒 Engine 🢒 Cruise Control 🢒 Cruise Control Indicator Always On

Cruise Control Indicator Always On non 4.2L

Step

Action

Yes

No

Schematic Reference: Cruise Control Schematics

Connector End View Reference: Engine Control Module Connector End Views

1

Did you perform the Diagnostic System Check - Vehicle?

Go to Step 2

Go to Diagnostic System Check - Vehicle

2

Turn ON the ignition, with the engine OFF.

Does the Cruise indicator illuminate after the instrument panel cluster (IPC) displays test?

Go to Step 3

Go to Testing for Intermittent Conditions and Poor Connections

3
  1. Turn OFF the ignition.
  2. Install a scan tool.
  3. Turn ON the ignition, with the engine OFF.
  4. With the scan tool, observe the Cruise Control parameter in the IPC data list.

Does the Cruise Lamp parameter display On?

Go to Step 6

Go to Step 7

4

Inspect for poor connections at the harness connector of the engine control module (ECM). Refer to Testing for Intermittent Conditions and Poor Connections and to Connector Repairs .

Did you find and correct the condition?

Go to Step 8

Go to Step 6

5

Inspect for poor connections at the harness connector of the IPC. Refer to Testing for Intermittent Conditions and Poor Connections and to Connector Repairs .

Did you find and correct the condition?

Go to Step 8

Go to Step 7

6

Replace the ECM. Refer to Control Module References for replacement, setup, and programming.

Did you complete the replacement?

Go to Step 8

--

7

Replace the IPC. Refer to Control Module References for replacement, setup, and programming.

Did you complete the replacement?

Go to Step 8

--

8

Operate the system in order to verify the repair.

Does the system operate properly?

System OK

Go to Step 2

Cruise Control Indicator Always On 4.2L

Step

Action

Yes

No

Schematic Reference: Cruise Control Schematics

Connector End View Reference: Powertrain Control Module Connector End Views

1

Did you perform the Diagnostic System Check - Vehicle?

Go to Step 2

Go to Diagnostic System Check - Vehicle

2

Turn ON the ignition, with the engine OFF.

Does the Cruise indicator illuminate after the instrument panel cluster (IPC) displays test?

Go to Step 3

Go to Testing for Intermittent Conditions and Poor Connections

3
  1. Turn OFF the ignition.
  2. Install a scan tool.
  3. Turn ON the ignition, with the engine OFF.
  4. With the scan tool, observe the Cruise Control parameter in the instrument panel cluster (IPC) data list.

Does the Cruise Lamp parameter display On?

Go to Step 6

Go to Step 7

4

Inspect for poor connections at the harness connector of the powertrain control module (PCM). Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs .

Did you find and correct the condition?

Go to Step 8

Go to Step 6

5

Inspect for poor connections at the harness connector of the IPC. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs .

Did you find and correct the condition?

Go to Step 8

Go to Step 7

6

Replace the PCM. Refer to Control Module References for replacement, setup, and programming

Did you complete the replacement?

Go to Step 8

--

7

Replace the IPC. Refer to Control Module References for replacement, setup, and programming.

Did you complete the replacement?

Go to Step 8

--

8

Operate the system in order to verify the repair.

Does the system operate properly?

System OK

Go to Step 2