Step | Action | Yes | No | ||||
|---|---|---|---|---|---|---|---|
Schematic Reference: Exterior Lights Schematics Connector End View Reference: Lighting Systems Connector End Views | |||||||
1 | Did you perform the Diagnostic System Check - Vehicle? | Go to Step 2 | |||||
2 | Verify that the clearance lamps are inoperative. Do the clearance lamps operate normally? | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 | ||||
3 | Is the right tail lamp inoperative also? | Go to Step 5 | Go to Step 4 | ||||
4 | Inspect the inoperative bulbs/sockets for open filaments or poor terminal contact. Does any lamp have an open filament or poor terminal contact? | Go to Step 7 | Go to Step 6 | ||||
5 | Repair one of the following conditions.
Refer to Wiring Repairs . Did you complete the repair? | Go to Step 8 | -- | ||||
6 | Repair the open or high resistance in the clearance lamps supply voltage circuit or ground circuit. Refer to Wiring Repairs . Did you complete the repair? | Go to Step 8 | -- | ||||
7 | Replace the inoperative bulb or repair/replace the socket. Refer to Clearance Lamp Replacement or Wiring Repairs . Did you complete the repair? | Go to Step 8 | -- | ||||
8 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 | ||||
