Removal Procedure
- Remove the I/P carrier. Refer to 
Instrument Panel Carrier Replacement.
 
- Remove the air temperature actuator-right retaining screws.
 
- Disconnect the air temperature actuator-right electrical connector.
 
- Remove the air temperature actuator-right.
 
Installation Procedure
- Install the air temperature actuator-right.
 
Caution: Refer to Fastener Caution in the Preface section.
- Tighten the air temperature actuator-right retaining screws. 
 
Tighten
Tighten the screws to 1.9 N·m (17 lb in).
- Install the air temperature actuator-right electrical connector.
 
- Install the I/P carrier. Refer to 
Instrument Panel Carrier Replacement.
 
- Recalibrate the air temperature actuator on vehicles equipped with automatic climate control (C68). Refer to 
Actuator Recalibration.