Removal Procedure
- Remove the evaporative emission (EVAP)/fuel hose/pipe assembly. Refer to 
Fuel Hose/Pipes Replacement - Chassis
 .
 
Important: Note the position of the EVAP/fuel hose/pipe assembly clips before disassembly.
- Remove the fuel/EVAP hose/pipe assembly retaining clips.
 
- Separate the EVAP purge pipe (2) from the fuel pipe (1).
 
Installation Procedure
- Position the new EVAP purge pipe (2) to the fuel pipe (1).
 
- Install the EVAP/fuel hose/pipe assembly clips as noted during disassembly.
 
- Install the EVAP/fuel hose/pipe assembly. Refer to 
Fuel Hose/Pipes Replacement - Chassis
 .