Removal Procedure
- Disconnect the positive crankcase ventilation (PCV) fresh air tube (2) from the air cleaner resonator
outlet duct (1).
 
- Loosen the clamps at the following:
 
| •  | Mass air flow (MAF)/intake air temperature (IAT) sensor | 
 
- Remove the air cleaner outlet duct bolt.
 
- Remove the air cleaner outlet duct.
 
Installation Procedure
- Install the air cleaner outlet duct.
 
Notice: Refer to Fastener Notice in the Preface section.
- Install the air cleaner outlet duct bolt.
 
Tighten
Tighten the bolt to 10 N·m (89 lb in).
- Tighten the clamps at the following:
 
Tighten
Tighten the clamps to 7 N·m (62 lb in).
- Connect the PCV fresh air tube (2) to the air cleaner resonator outlet duct (1).