Removal Procedure
- Raise and suitably support the vehicle. Refer to 
Lifting and Jacking the Vehicle
.
 
- Disconnect the evaporative emission (EVAP) canister vent valve electrical connector (2).
 
- Disconnect the EVAP vent pipe from the canister vent valve.
 
- Disengage the bracket retaining tab and remove the EVAP canister vent valve.
 
Installation Procedure
- Install the EVAP canister vent valve onto the bracket.
 
- Inspect for proper retention of the EVAP vent valve on the bracket.
 
- Connect the EVAP vent pipe to the EVAP canister vent valve.
 
- Connect the EVAP canister vent valve electrical connector (2).
 
- Lower the vehicle.