Notice: Refer to Fastener Notice in the Preface section.
Tighten
Tighten the nut (3) to 20 N·m (15 lb ft).
Callout  | Component Name  | 
|---|---|
| 
 Notice: Refer to Fastener Notice in the Preface section. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary ProcedurePosition the rear wiper arm at the mid-wipe position on the glass and cycle the ignition key to the OFF position.  | |
1  | Wiper Arm Nut Finish Cover  | 
2  | Rear Wiper Arm Pivot Shaft Nut Tighten  | 
3  | Rear Wiper Arm Washer Hose  | 
4  | Rear Wiper Arm Tip 
  | 
5  | Rear Wiper Arm Blade  |