Removal Procedure
- Remove the windshield wiper arms. Refer to 
Windshield Wiper Arm Replacement .
 
- Remove the air inlet grille panel. Refer to 
Air Inlet Grille Panel Replacement.
 
- Remove the bolts retaining the wiper transmission assembly to the vehicle.
 
- Carefully push the wiper transmission assembly rearward to disengage the wiper motor from the slot in the plenum.
 
- Disconnect the wiper motor electrical connector.
 
- Remove the wiper transmission assembly from the cowl panel plenum.
 
Installation Procedure
- Position the wiper transmission assembly to the cowl panel plenum.
 
- Connect the electrical connector to the wiper motor.
 
- Insert the wiper motor post into the slot in the plenum, push the transmission assembly forward to seat the post.
 
Notice: Refer to Fastener Notice in the Preface section.
- Install the bolts retaining the wiper transmission assembly to the vehicle.
 
Tighten
Tighten the wiper transmission assembly bolts to 8 N·m (71 lb in).
- Install the air inlet grille panel. Refer to 
Air Inlet Grille Panel Replacement.
 
- Install the windshield wiper arms. Refer to 
Windshield Wiper Arm Replacement .