Removal Procedure
- If removing the right sill plate, remove the right insulator panel. Refer to 
Instrument Panel Insulator Panel Replacement - Right Side .
 
- Starting at the rear of the sill plate, use a flat-bladed tool in order to release the 5 retaining tabs.
 
- If removing the left sill plate, remove the sill plate from the hood release handle.
 
- Remove the sill plate from the door frame.
 
- Remove any retaining tabs that remain attached to the door frame.
 
Installation Procedure
- Ensure that all 5 retaining tabs are securely attached to the sill plate.
 
- If installing the left sill plate, position the hood release handle through the sill plate.
 
- Align the retaining tabs to the door frame slots.
 
- Starting at the front of the sill plate, push down on the sill plate, seating the retaining tabs to the door frame.
 
- If installing the right sill plate, install the right insulator panel. Refer to 
Instrument Panel Insulator Panel Replacement - Right Side .