Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Wiper/Washer System Check? | -- | Go to Step 2 | |
2 |
Does the test lamp illuminate? | -- | Go to Step 4 | Go to Step 3 |
3 | Repair the open in CKT 243 to the wiper/washer switch. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 13 | -- |
4 |
Does the test lamp illuminate? | -- | Go to Step 6 | Go to Step 5 |
5 | Inspect for a poor connection at connector C201, terminal E9, or for an open in the pigtail (CKT 243) to the wiper/washer switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 13 | Go to Step 12 |
6 |
Does the test lamp illuminate? | -- | Go to Step 8 | Go to Step 7 |
7 | Repair the open or the poor connection in CKT 92 between connector C201 and the wiper motor. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 13 | -- |
8 | Connect the test lamp from the wiper motor connector, terminal C to terminal A. Does the test lamp illuminate? | -- | Go to Step 10 | Go to Step 9 |
9 | Repair the open in CKT 1650. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 13 | -- |
10 | Inspect for a poor connection to the wiper motor. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 13 | Go to Step 11 |
11 | Replace the wiper motor. Refer to Windshield Wiper Motor Replacement . Did you complete the replacement? | -- | Go to Step 13 | -- |
12 | Replace the wiper/washer switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle Did you complete the replacement? | -- | Go to Step 13 | -- |
13 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK |
