Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Wiper/Washer System Check? | -- | Go to Step 2 | |
2 | Do the wipers operate at low speed with the wiper switch in HI? | -- | Go to Step 4 | Go to Step 3 |
3 | Replace the wiper/washer switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle . Did you complete the replacement? | -- | Go to Step 11 | -- |
4 |
Does the test lamp illuminate? | -- | Go to Step 7 | Go to Step 5 |
5 | Inspect for a poor connection at connector C201, or for an open in the pigtail to the wiper/washer switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 11 | Go to Step 6 |
6 | Replace the wiper/washer switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle . Did you complete the replacement? | -- | Go to Step 11 | -- |
7 |
Does the test lamp illuminate? | -- | Go to Step 9 | Go to Step 8 |
8 | Repair the open in CKT 92. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 11 | -- |
9 | Inspect for a poor connection to the wiper motor. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 11 | Go to Step 10 |
10 | Replace the wiper motor. Refer to Windshield Wiper Motor Replacement . Did you complete the repair? | -- | Go to Step 11 | -- |
11 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK |
