Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Wiper/Washer System Check? | -- | Go to Step 2 | |
2 | Inspect the washer solvent container for proper fluid level. Did you find and correct the condition? | -- | Go to Step 14 | Go to Step 3 |
3 | Inspect for pinched, kinked or disconnected washer hoses. Did you find and correct the condition? | -- | Go to Step 14 | Go to Step 4 |
4 | Inspect for clogged windshield washer nozzles. Did you find and correct the condition? | -- | Go to Step 14 | Go to Step 5 |
5 | Inspect for an open FRT WPR/WSHR fuse. Did you find and correct the condition? | -- | Go to Step 14 | Go to Step 6 |
6 |
Does the test lamp illuminate? | -- | Go to Step 7 | Go to Step 9 |
7 | Inspect for a poor connection at the washer pump connector. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 14 | Go to Step 8 |
8 | Replace the washer pump. Refer to Washer Pump Replacement . Did you complete the replacement? | -- | Go to Step 14 | -- |
9 |
Does the test lamp illuminate? | -- | Go to Step 10 | Go to Step 11 |
10 | Repair the open in CKT 1650. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 14 | -- |
11 |
Does the test lamp illuminate? | -- | Go to Step 12 | Go to Step 13 |
12 | Repair the open in CKT 228. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 14 | -- |
13 | Replace the wiper/washer switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle . Did you complete the replacement? | -- | Go to Step 14 | -- |
14 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK |
