Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Wiper/Washer System Check? | -- | Go to Step 2 | |
2 |
Does the voltage measure greater than the specified value? | 1.0 V | Go to Step 5 | Go to Step 3 |
3 | Inspect for a poor connection at connector C201, or for an open in the pigtail to the wiper/washer switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 13 | Go to Step 4 |
4 | Replace the wiper/washer switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle . Did you complete the replacement? | -- | Go to Step 13 | -- |
5 | Backprobe from the wiper/washer switch connector C201, terminal E3, to ground with a DMM. Does the voltage measure greater than the specified value? | 1.0 V | Go to Step 8 | Go to Step 6 |
6 | Inspect for a poor connection at connector C201, or for an open in the pigtail to the wiper/washer switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 13 | Go to Step 7 |
7 | Replace the wiper/washer switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle . Did you complete the replacement? | -- | Go to Step 13 | -- |
8 |
Does the voltage measure greater than the specified value? | 1.0 V | Go to Step 10 | Go to Step 9 |
9 | Repair the open in CKT 113. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 13 | -- |
10 | Measure the voltage from the wiper motor connector, terminal E, to ground with a DMM. Does the voltage measure greater than the specified value? | 1.0 V | Go to Step 12 | Go to Step 11 |
11 | Repair the open in CKT 112. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 13 | -- |
12 | Replace the wiper motor cover. Refer to Wiper Motor Cover Replacement . Did you complete the replacement? | -- | Go to Step 13 | -- |
13 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK |
