Adjustment Procedure
- Loosen the 13 mm bolts from the upper and lower door side hinge.
 
DO NOT remove the bolts.
- Adjust the door as needed by repositioning the door in the following manner:
 
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Retighten the 13 mm upper bolts.
 
Tighten
Tighten the 13 mm bolts, in sequence as shown, to 33 N·m (24 lb ft).
- Retighten the 13 mm lower bolts.
 
Tighten
Tighten the 13 mm bolts to 33 N·m (24 lb ft).
- Verify the door adjustment, repeat if needed.
 
- Open and close the door.