Stabilizer Shaft Link Replacement with Rear Twist Axle

1. Raise the vehicle and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .



2. Remove the stabilizer shaft link upper nut (1).
3. Remove the stabilizer shaft link lower nut (3).
4. Remove the stabilizer shaft link (2) from the suspension strut and stabilizer shaft.

1. Install the stabilizer link (2) to the suspension strut and stabilizer shaft.

Notice: Refer to Fastener Notice in the Preface section.

2. Install the stabilizer shaft link nuts.

Tighten
Tighten the nut to 45 N·m (33 lb ft).

3. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
4. Lower the vehicle.