High Mount Stop Lamp Replacement. Chevrolet Uplander 2008

For 1990-2009 cars only

Makes 🢒 Chevrolet 🢒 2008 🢒 Uplander 🢒 Preface 🢒 Cautions and Notices 🢒 High Mount Stop Lamp Replacement

Callout	Component Name
Notice: Refer to Fastener Notice in the Preface section. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .
1	Screw, High Mounted Stop Lamp (Qty: 2) Tighten 2 N·m (18 lb in)
2	Lamp Assembly, High Mounted Stop Tip Pull the high mounted stop lamp assembly rearward to remove. Disconnect the electrical connector. There are no bulbs to be replaced, the lamp assembly has LED lights and must be replaced as an assembly.

Callout

Component Name

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Screw, High Mounted Stop Lamp (Qty: 2)

Tighten
2 N·m (18 lb in)

Lamp Assembly, High Mounted Stop

Tip

Pull the high mounted stop lamp assembly rearward to remove.
Disconnect the electrical connector.
There are no bulbs to be replaced, the lamp assembly has LED lights and must be replaced as an assembly.