Special Tools

J-38185 Hose Clamp Pliers

Note: Use the J-38185 pliers to gently release tension on the hose clamp until the hose clamp lock feature engages allowing removal of the hose.

1. Drain the cooling system. Refer to Cooling System Draining and Filling .
2. Using the J-38185 pliers , release the tension on the hose clamp at the thermostat housing and reposition the clamp.
3. Remove the radiator outlet hose from the thermostat housing.



4. Remove the thermostat housing bolt/stud.
5. Remove the thermostat housing.

1. Position the thermostat housing.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the thermostat housing bolt/stud and tighten to 25 N·m (18 lb ft) .



3. Install the radiator outlet hose to the thermostat housing.
4. Using a small flat-bladed screwdriver, release the hose clamp retention lock at the thermostat housing.
5. Fill the cooling system. Refer to Cooling System Draining and Filling .