Removal Procedure
- Open the liftgate.
 
- Remove the liftgate water deflector. Refer to 
Liftgate Water Deflector Replacement 
 .
 
- Disconnect the electrical connector from
the liftgate latch.
 
- Remove the liftgate latch retaining bolts.
 
- Using a small flat-bladed tool, remove the latch cable clip (2)
from the liftgate latch.
 
- Release the latch cable retainer and remove latch cable from liftgate
latch.
 
- Remove the liftgate latch from the liftgate.
 
Installation Procedure
- Install the liftgate latch to the liftgate
 
- Secure the lock cylinder cable (1) into the liftgate latch.
 
- Install the latch cable to the liftgate latch and engage latch cable retainer (2).
 
- Connect the electrical connector to the liftgate latch.
 
Notice: Refer to Fastener Notice in the Preface section.
- Install the liftgate latch retainer bolts.
 
Tighten
Tighten the bolts to 10 N·m (89 lb in).
- Install the liftgate water deflector. Refer to 
Liftgate Water Deflector Replacement 
 .
 
- Close the liftgate.