GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Uplander Ext. 🢒 Engine 🢒 Engine Electrical 🢒 Steering Wheel Replacement

Special Tools

    • J-1859-A Steering Wheel Puller
    • J-42578 Steering Wheel Puller Legs

Removal Procedure
  1. Disable the SIR system. Refer to SIR Disabling and Enabling .
  2. Remove the inflator module . Refer to Inflatable Restraint Steering Wheel Module Replacement .
  3. Disconnect the steering wheel control electrical connector.
  4. Remove the steering wheel nut.
  5. Install J-42578 Puller Legs and J-1859-A Puller to the steering wheel.

    6. Object Number: 255213 Size: SH
  6. Use J-42578 Puller Legs and J-1859-A Puller in order to remove the steering wheel.
  7. Remove J-42578 Puller Legs and J-1859-A Puller from the steering wheel.
  8. If equipped, remove the controls and the control harness from the steering wheel.

Installation Procedure
  1. If equipped, install the controls and the control harness to the steering wheel.

    2. Object Number: 294367 Size: SH
  2. Install the wiring through the steering wheel.
  3. Install the steering wheel.
  4. Connect the steering wheel control electrical connector.

    5. Caution: Refer to Fastener Caution in the Preface section.

  5. Install the steering wheel nut and tighten to 41 N·m (30 lb ft) .
  6. Install the inflator module. Refer to Inflatable Restraint Steering Wheel Module Replacement .
  7. Enable the SIR system. Refer to SIR Disabling and Enabling .