GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2009 🢒 Uplander Ext. 🢒 Body Repair 🢒 Bumpers and Fascias 🢒 Rear Energy Absorber Replacement

Removal Procedure

    Object Number: 1544781 Size: SH
  1. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .
  2. Disconnect the rear object sensor wiring harness from the rear energy absorber, if equipped.
  3. Remove the energy absorber from the fascia by releasing the tabs on the fascia.

Installation Procedure

    Object Number: 1544781 Size: SH
  1. Position the energy absorber to the rear bumper fascia and snap in place.
  2. Position the rear fascia to the impact bar.
  3. Connect the rear object sensor wiring harness to the rear energy absorber, if equipped.
  4. Install the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .