GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Chevrolet 🢒 2006 🢒 Uplander - 4WD 🢒 Accessories 🢒 Cellular Communication 🢒 Mobile Telephone Antenna Coaxial Cable Replacement

Removal Procedure
  1. Remove the instrument panel (I/P) trim pad. Refer to Upper Trim Pad, Outer Trim Cover, Fuse Block Access Cover Replacement - Instrument Panel in Instrument Panel, Gages, and Console.

    2. Object Number: 661374 Size: SH
  2. Remove the garnish molding from the right side windshield pillar.
  3. Unscrew the coaxial cable from the cellular antenna on the windshield.
  4. Unscrew the coaxial cable from the VIU/VCU module.

    5. Object Number: 661371 Size: SH
  5. Remove the bolt from the ground tab on the right side on the I/P.

    6. Object Number: 661370 Size: SH
  6. Remove the cable clips which secure the cable to the I/P.

    7. Object Number: 661372 Size: SH
  7. Remove the coaxial cable.

Installation Procedure

    Object Number: 661372 Size: SH
  1. Install the coaxial cable.

    2. Object Number: 661370 Size: SH
  2. Install the cable clips to the I/P frame.

    3. Object Number: 661371 Size: SH
  3. Install the bolt to the ground tab on the right side on the I/P.

    4. Object Number: 661374 Size: SH
  4. Install and tighten the coaxial cable to the VIU/VCU module.
  5. Retape the cable to the A-pillar.
  6. Install and tighten the coaxial cable to the cellular antenna on the windshield.
  7. Install the garnish molding to the right side windshield pillar.
  8. Install the I/P trim pad. Refer to Upper Trim Pad, Outer Trim Cover, Fuse Block Access Cover Replacement - Instrument Panel in Instrument Panel, Gages, and Console.