The power sliding door does not operate electrically.
|
| • | One of the following conditions is causing battery voltage interruption: |
| - | The vehicle battery was disconencted and reconnected. |
| - | The vehicle battery was discharged and recharged. |
| - | The RADIO fuse (located in the underhood accessory wiring junction
block) was removed and then replaced. |
| • | The PSD Diagnostic Mode is entered and is currently active. |
| • | The B/U LAMP fuse may be open. With this fuse open the module
never sees a park input causing the door to be inoperative. |
| Re-initialize
the PSD system. Refer to
Power Sliding Door (PSD) Re-Initialization
.
|
