For 1990-2009 cars only
Removal Procedure
- Open and support the hood.
- Remove the hood rear weatherstrip from the pinchweld flange.
- Remove the hood rear outer seals from the fenders.
- Clean the old adhesive with 3M™ P/N 8984 adhesive remover or equivalent in the area of the hood outer seals in order to ensure proper adhesion of adhesive.
Installation Procedure
- Apply new adhesive GM P/N 12345096 if you are reusing the old hood rear weatherstrips.
- Install the hood rear weatherstrip to the flange.
- Install the hood rear outer seals to the fenders.
- Press into place until fully seated to the fender.
- Close the hood.
