Preliminary Procedure

Open the lift gate in order to access the tail lamp access hole covers.

1

Tail Lamp Access Hole Cover (Qty: 2)

Tip
Use a small flat bladed tool in order to remove the covers.

2

Tail Lamp Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
3 N·m (27 lb in)

3

Tail Lamp Assembly

Tip
Disconnect the electrical connector prior to removing the tail lamp from the rear body panel.

4

Tail Lamp Filler Panel Nut

Tip
Inspect the nuts, replace if damaged.