Removal Procedure
- Remove the air cleaner outlet duct. Refer to 
Air Cleaner Outlet Duct Replacement 
.
 
- Disconnect the atmospheric vent hose (2)
from the air cleaner resonator (1).
 
- Loosen the air cleaner resonator outlet
duct clamp (4).
 
- Remove the 2 air cleaner resonator bolts (1).
 
- Complete the following in order to remove the air cleaner resonator (2)
and outlet duct from the engine:
 
| 5.1.  | Lift upward on the assembly. | 
 
| 5.2.  | Disconnect the following: | 
 
|        -  | The crankcase ventilation hose (3) from the camshaft cover | 
 
|        -  | The outlet duct (4) from the throttle body | 
 
| 5.3.  | Remove the assembly (2) from the engine. | 
 
Installation procedure
- Complete the following in order to install
the air cleaner resonator (2) and outlet duct to the engine:
 
| 1.1.  | Position the outlet duct (4) over the throttle body assembly. | 
 
| 1.2.  | Install the crankcase ventilation hose (3) to the camshaft cover
port. | 
 
| 1.3.  | Align the air cleaner outlet resonator bolts (1) with the captured
nuts on the camshaft cover. | 
 
Important: Ensure the outlet duct is properly installed to the throttle body assembly.
- View into the air cleaner resonator to ensure the outlet duct is not rolled
under at the throttle body assembly.
 
Notice: Refer to Fastener Notice in the Preface section.
- Properly position the air cleaner resonator outlet duct clamp (4).
 
Tighten
Tighten the air cleaner resonator outlet duct clamp (4) to 6 N·m
(53 lb in).
- Install the 2 air cleaner outlet resonator to camshaft cover bolts (1).
 
Tighten
Tighten the air cleaner resonator bolts to 6 N·m (53 lb in).
- Connect the atmospheric vent hose (2)
to the air cleaner resonator (1).
 
- Install the air cleaner outlet duct. Refer to 
Air Cleaner Outlet Duct Replacement 
.