EI05071 - Remote Keyless Entry (RKE) Inoperative (Inspect Cowl Area for Water Leak)

This bulletin is being revised to correct the labor operation number. Please discard Corporate Bulletin Number 05-08-52-001A (Section 08 -- Body and Accessories).

Some customers may comment that one or both key fobs no longer work. After confirming the customer concern, the technician may find that a simple re-learn will correct the condition. If this is true, follow the correction below.

Important: All customer owned transmitters must be present.

1. Confirm the customer concern.
2. Perform Transmitter (fob) programming per SI. Refer to SI Document ID# 1547607.

•	If reprogramming the transmitter (fob) CORRECTS the customer concern, inspect the cowl area and the BCM for evidence of a water leak.

-	If there IS evidence of a water leak into the BCM, REPLACE the BCM and REPAIR the source of the leak following published procedures.

-	If there is NO evidence of a water leak AND the vehicle HAS prior service history for the transmitter (fob) inop, REPLACE the BCM following published procedures.

-	If there is NO evidence of a water leak AND the vehicle has NO previous service history for this condition, DO NOT replace the BCM.

•	If programming the transmitter (fob) DOES NOT CORRECT the customer concern, follow published Service Information to diagnose and correct the concern. Refer to SI Document ID# 1394639.

Claim ONLY ONE of the following applicable labor operations based on the corrective action taken.

For vehicles repaired under warranty, use: