GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 GMC_Truck 🢒 2002 🢒 Envoy - 2WD 🢒 Engine 🢒 Engine Controls - 4.2L 🢒 Stop Lamp Switch Replacement

Removal Procedure

    Object Number: 748017 Size: SH
  1. Remove the pushrod retainer (3) from the brake pedal pin (4).
  2. Remove the stop lamp switch (1) and the pushrod (2) from the brake pedal pin (4).
  3. Disconnect the electrical connector and remove the stoplamp switch (1).

Installation Procedure

    Object Number: 748017 Size: SH
  1. Install the electrical connector on the stop lamp switch (1).
  2. Position the stop lamp switch (1) on the pushrod (2) and install on the brake pedal pin .
  3. Install the pushrod retainer (3) to the brake pedal pin (4). The retainer will snap into place.