Removal Procedure
- Lower the front portion of the headliner. Refer to 
Headlining Trim Panel Replacement 
in Interior Trim.
 
- Disconnect the electrical connectors from the
antenna assembly.
 
- Loosen the retaining nut until the assembly can be removed from the roof
panel.
 
- Using an upward motion, remove the antenna assembly from the roof.
 
Installation Procedure
- Install the antenna assembly from
the top of the roof. 
 
- Lower the antenna assembly to the roof panel, ensuring the anti-rotation
pin is properly indexed.
 
Notice: Refer to Fastener Notice in the Preface section.
- Tighten the retaining nut.
 
Tighten
Tighten the nut to 6 N·m (53 lb in).
- Connect the antenna electrical connectors.
 
- Install the headliner. Refer to 
Headlining Trim Panel Replacement 
 in Interior
Trim.