- Remove the vacuum plug (513).
 
- Remove the throttle body nuts (503).
 
- Remove the throttle body (502) and gasket (501).
 
- Discard the gasket.
 
- Remove the throttle body studs (504), if required.
 
- Remove the oil fill cap (418).
 
- Remove the oil fill tube (416) and bolt (419).
 
- Remove the bolt and manifold absolute pressure (MAP) sensor.
 
- Inspect the MAP sensor grommet for damage.
 
- Remove the evaporative emission (EVAP) tube.
 
- Remove the EVAP canister purge solenoid valve and bolt.
 
- Inspect the O-ring seal for damage. Replace as needed.